The E-Mat Dust Collector is a self-contained, economical, compact, high efficiency fabric filter, ideal for intermittent duty.
Dust in the conveying air stream is drawn into the E-Mat where separation
occurs in two stages.
During the Primary stage, heavier particles arc deposited into the hopper due to a
reduction in velocity and change in direction of air flow. Secondary separation
takes place when the fine, lighter dust is deposited onto the outer surface of the fabric.
Cleaned air is discharged by the centrifugal fan either back into the working environment or to atmosphere.
To maintain maximum efficiency, the shaker is operated under no air flow conditions. On the CU, FBV and CUVH units, an automatic sequence control panel is used to ensure optimum efficiency, and on NBV and NBVH units this is achieved by a manual push button starter.
The extrtacted dust falls into a collection facility below.
On normal applications cleaning cycles would be approximately every four hours.
E-Pulse is a range of fully automatic reverse jet cleaning fabric filters designed for continuous operation and arduous duties.
Multi-bank plant type filter with various discharge and dust collection arrangements to suit a wide range of situations.
Exhaust fans are positioned separately to suit site conditions.
Varying arrangements of banks and tiers allows a wide range of filter fabric areas. These versatile configurations will suit almost all site requirements and limitations.
The filters are based on standard 0.7m, 1.0m and 1.5m long pad assemblies with a reverse jet cleaning system.

This Dust Control unit incorporates integral centrifugal fan, hopper and scaled dust disposal bin for highly efficint operation. Available with a range of filter and fan options as illustrated. This Dust Control units can also be supplied without fan and with alternative dust disposal systems.
A fully automatic,s elf-contained venting filter for use in venting ait which is heavily dust-laden
from enclosed spaces (e.g. silos, storage bills, etc. and especially for
process industry applications). Many Filter and fan options to suiet a wide variety of requirements.
Three model types are available:

A snap cuff style collector that comes in bag lengths of 2, 3, 0r 5 meters.